12 Volt Mini-Charger Max For Motorized Bike LS-3 Lighting. Now you can get a reliable lighting system for your 2 cycle motorized bicycle and this 12 volt Mini-Charger makes up a part of that system. This is designed to charge the 12 volts SLA battery pack for our LS-3 Lighting System, and will also charge rechargeable AA (NiMH batteries).This item is designed to be used with our 12 volt "Mini-Gen MAX". The battery can be charged up while riding and used for 10 watt halogen headlight or equivalent lighting. This charger includes an inline fuse to protect the circuit in the unlikely event of overloads or shorts.
This 12 Volt Mini-Charger can also be used with 6 volt Mini-Gens, but a 12 volt Mini-Gen is recommended for better results. When used with our Mini-Gen MAX, this 12 Volt Mini-Charger will charge a 12 volts 10 x AA rechargeable battery pack and maintain the charge of a fully charged battery pack. This 12 Volt Mini-Charger for 2 cycle motorized bicycles is designed to be used with our 12 Volt Mini-Gen Max. The rate of charge is variable and depends on engine speeds. This battery charger delivers a significant amount of charge to 10AA (12 volts) battery pack and also for 12 volt SLA batteries.
Chargers, battery packs, light switch and lights are all available separately in our store. Just strap mini-charger onto bicycle seat post after using a layer of duct tape to frame (helps prevent scatches and improves grip). Cable ties are included, but duct tape is not included. This photo shows a night view of the Mini-Charger with yellow LED light indicating a working circuit.
This can be strapped to other places if preferred. Remove a nut from carb intake pipe and attach the Mini-Charger ground cable (as seen in photo). The ground cable must be grounded to engine for the charger to work.
It might also be necessary to use another wire connector between engine and frame in order for frame grounded lights to work. In most cases the engine is already in contact with the bike's metal frame, so the need for a separate connection is not likely.NOTE: Actual LED light will be yellow. Here's a view of inside the 12AA rechargeable battery pack. This is a 14.4 volts setup where 2 6AA packs are connected in series. This can be charged with the Mini-Charger/Mini-Gen MAX combo for very bright 10 watt halogen headlight.
The Mini-Charger can be connected to 12AA batteries in a pack to be charged for providing 10 watts of light. A 10 watt halogen headlight would be ideal for this purpose. A low wattage 12 to 14 volt tail light can be added (2 to 3 watts). An LED tail light could be even more energy efficient.An SLA 12 volt battery can also be used. Connect the negative and positive wires from Mini-Charger to battery. Use duct tape or cable ties to secure wire, then use duct tape or cable ties to strap wires to bike frame. Your setup will look much better than this!
The green wire from Mini-Charger will be routed to light switch (not included). Green LED light on Mini-Charger will indicate charging activity while engine is running. A fuse holder is included with Mini-Charger to hold a 1 Amp fuse (recommended).CHARGER WITH BATTERY is available in our store. Feedback is very important to us. It is impossible to address issues if we do not know about them! For helping with your order or if you have any questions regarding our products. All messages are answered within 24-48 hours. We will do our best to resolve the issue. Thank you for looking, if you have any questions feel free to ask and we will do our best to get back to you promptly! For ALL Motorized Bicycles we can provide engines, engine kits, high performance spare parts, motorized bicycle and spare parts of bike.
The item "Charger 12V 66cc 80cc 2 Stroke Engine Motorized Bicycle" is in sale since Monday, November 19, 2018. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts". The seller is "cafemotoracer" and is located in Las Vegas, Nevada. This item can be shipped worldwide.